This paper describes a Model 102+ for monitoring VOC's (ppb), CO2 and other contaminants (using electrochemical sensors) for monitoring the condition of indoor air quality. A headspace method for soil & water is also described along with information of the monitoring of accelerants in arson investigations by ATF and the Indonesian National Police.
A Multi Functional Analyzer for IAQ Monitoring
Additional information on the Model 102+ was described in my blog:
PID Model_102_Photoionization Analyzer 117 Lamp
Follow my blog at:
Saturday, August 27, 2011
Saturday, August 20, 2011
Photoionization Analyzer with Snap On Heads for VOC's #photoionization ,#AIHA, # industrial hygiene, # Snap On Heads,
The Model 102 with its unique Snap On Heads is described in detail in this presentation.
PID Model_102_Photoionization Analyzer 117 Lamp
A photo of the Model 102 with 9.5. 10.6 & 11.7 eV Snap On Heads is shown in the photo below:
PID Model_102_Photoionization Analyzer 117 Lamp
A photo of the Model 102 with 9.5. 10.6 & 11.7 eV Snap On Heads is shown in the photo below:
Relative Photoionization Sensitivities for the HNU and PID Analyzers PID's #AIHA, #industrial hygiene, # photoionization, #response factors
A list of the relative photoionization sensitivities and ionization potentials for more than 500 compounds are listed below for the HNU and PID Analyzers Models PI101, HW101, IS101, DL101, & DL102:
Photo Ionization Relative Sensitivities and IP's for HNU and PID Analyzers Instruments
Note that in the 102 & 102+ the sensitivities are embedded in a library containing 300+ response factors for the 10.6, 9.5 and 11.7 eV lamps. Any of these gases in the table can be used for calibration and the response factors will still be valid. A photo of the PID Analyzers Model 102 with Snap on Heads is shown below.
#AIHA, #industrial hygiene, # photoionization, #response factors
Photo Ionization Relative Sensitivities and IP's for HNU and PID Analyzers Instruments
Note that in the 102 & 102+ the sensitivities are embedded in a library containing 300+ response factors for the 10.6, 9.5 and 11.7 eV lamps. Any of these gases in the table can be used for calibration and the response factors will still be valid. A photo of the PID Analyzers Model 102 with Snap on Heads is shown below.
#AIHA, #industrial hygiene, # photoionization, #response factors
Saturday, August 13, 2011
PID and Process GC Instrumentation
The histoy of the photoionization detector (PID) is described along with its application to process gas chromatography (GC). Applications for solvents, BTEX, odorous sulfur compounds...
PID and Process GC Instrumentation JackDriscoll
A photo of the Model 301C is shown below:
PID and Process GC Instrumentation JackDriscoll
A photo of the Model 301C is shown below:
Sunday, August 7, 2011
Measurement of chlorinated HC with an 117 PID.pdf
A PID Analyzers Model 102 with a long life 11.7 eV lamp is used to measure chlorinated hydrocarbons like carbon tetrachloride, methylene chloride, 1,1,2,2 tetrachloro ethane,... and formaldehyde. A copy of the paper is given below.
&Measurement of Chlorinated HC With an 117 PID
A photo of the Model 102 is shown below:
&Measurement of Chlorinated HC With an 117 PID
A photo of the Model 102 is shown below:
Friday, August 5, 2011
Suffolk University Solar Energy Project #Suffolk
Suffolk Unversity has a field station in Maine. In addition to the biological studies there, the Physics Department, under the direction of Prof. Walter Johnson, has a research project comparing wind and solar generated power. A preliminary paper was given at the Second Cape Cod Science Cafe in Hyannis, MA in April 2011. The Third Cape Cod Science Cafe on the Topic of Recycling is coming up shortly. Look for the announcement.
1.88kw grid tied photovoltaic system installed on pole mount at field station for Suffolk University in South Edmonds Township, Maine. A photo is shown below:
1.88kw grid tied photovoltaic system installed on pole mount at field station for Suffolk University in South Edmonds Township, Maine. A photo is shown below:
Subscribe to:
Posts (Atom)